3D-printerfilament eSUN ABS+HS 1,75 mm 1 kg - rød

EABS+HIGH SPEED 1,75mm RED 1kg eSUN ABS+HS eSUN ABS+HS, 1 pc(s), 1 kg eSUN ABS+HS. Printing material: ABSplus, Printing colours: Red, Print speed: 300 mm/sec. Weight: 1 kg, Diameter: 1.75 mm. Quantity per pack: 1 pc(s) ABS+HS is a modified version of ABS material. Compared to conventional ABS, it exhibits lower shrinkage and superior interlayer adhesion, reducing the likelihood of warping and cracking during printing. It contains low VOC (Volatile Organic Compounds) components, resulting in a reduced odor during the printing process, making it more comfortable and stress-free. This material is optimized for high-speed printing, maintaining its performance even at higher speeds, providing an excellent printing experience. Additionally, it can be acetone polished to eliminate layer lines and further enhance the print quality. Features Printing material: ABSplus Printing colours: Red Print speed: 300 mm/sec Impact strength: 20 kJ/m² Tensile modulus: 28 MPa Flexural modulus: 1477 MPa Flexural strength: 46 MPa Maximum extruder tip temperature: 270 °C Elongation at break: 3.9% Minimum extruder tip temperature: 230 °C Tensile strength: 28000 kPa Bulk density: 1.04 g/cm² Weight & dimensions Weight: 1 kg Diameter: 1.75 mm Packaging data Quantity per pack: 1 pc(s)...