Lapp Ölflex servo fd 7tce 4g16awg

LAPP ÖLFLEX® Servo FD 7TCE is a continuous flex and oil resistant servo cable suitable for mounting either in equipment or in cable tray, eliminating the need for two different types of cable in a single run. A longer cable connection is possible between the drive and the motor due to its low capacitance design. This one cable solution is ideal for installing power to servo motor systems. 2. CABLE DESCRIPTION - Bare copper super fine wire stranding - EPR insulation - One or two individually Foil and TC Braid shielded pairs - Overall TC Braid Shield - Orange UV, oil and flame resistant specially formulated thermoplastic elastomer (TPE) jacket 3. TECHNICAL DATA Conductor Stranding 18 AWG (1,0 mm2) to 10 AWG (6,0 mm2): Class 6 (IEC 60228; VDE 0295) 18 AWG meets only class 6 cross section and DC conductor resistance Design / Make-up Cable is designed in accordance with the requirements of UL Standard 1277 and with CSA standards C22.2 No. 239Insulation Ethylene Propylene Rubber (EPR) insulation Control Pairs One Control Pair: Individually foil shielded and a TC Braid Shield (85% coverage) Two Control Pairs: Individually foil shielded with TC Drain wire and TC Braid Shield (85% coverage) Shield Tinned Copper Braid Shield (85% coverage) Outer Sheath Specially formulated thermoplastic elastomer (TPE) jacket Nominal Voltage UL TC: 1000V UL Flexible Motor Supply: 1000V VDE U0/U: 600/1000V Test Voltage 4000V Min Bend radius For stationary use: 5 x OD For continuous flexing: 7.5 x OD Temperature Range For UL TC: -25°C to +90°C For stationary use: -40°C to +105°C For continuous flexing: -25°C to +90°C Cable Attributes OR-03, FR-03, CF-02, MP-03 90°C Wet or Dry, Sunlight resistant, Direct Burial Approvals UL Type TC (Tray Cable) - ER (Exposed Run) per UL 1277 UL Flexible Motor Supply Cable per UL 2277 c(UL) CIC FT4 per CSA C22.2 No. 239 (14 AWG and smaller) cRU AWM II A/B FT4 per CSA C22.2 No. 210 Lapp Ölflex servo fd 7tce 4g16awg