Lapp Ölflex heat 125 sc 1x1 gul/grøn r100

Lapp Ölflex heat 125 sc 1x1 gul/grøn r100

ÖLFLEX® HEAT 125 SCHalogen free single core with GL certificate, special fire performance, IEC 60332-3, suitable for +125°CCPR: see www.lappkabel.dkVDE-tested and -markedImproved characteristics in the event of a fireFor safety in areas with high density of peopleReduction of flame propagation, density and toxicity of smoke gases in event of fireMinimises damage to buildings and equipment caused by the formation of toxic acid fumes in firesCertified for maritime applicationsFor the wiring and connection of lighting, heating appliances, control cabinets, and distributors in mechanical and plant engineeringSuitable for assembling cable harnesses and wiring during switch cabinet installationFire behaviour:- Flame-retardant (IEC 60332-1-2)- Halogen-free (IEC 60754-1)- No corrosive gases (IEC 60754-2)- Low smoke density (IEC 61034-2)- Low toxicity (EN 50305)Extended fire behaviour:H05Z-K (0,5mm² up to 1,0mm²): see data sheetH07Z-K (= 1,5mm²): no fire propagation according to IEC 60332-3-24 respectively IEC 60332-3-25Oil-resistant according to DIN EN 50290-2-22 (TM54)Abrasion and notch-resistantUV-resistant according to ISO 4892-2Type H05Z-K and H07Z-K according to EN 50525-3-41 with advanced featuresGermanischer Lloyd (GL) certificate no. 11118-14HHFine-wire, tinned-copper conductorElectron beam cross-linked polyolefin copolymer insulation Conductor stranding: Fine wire acc. to VDE 0295, class 5 / IEC 60228 class 5 from 0.5 mm²Minimum bending radius: Fixed installation: 4 x outer diameterNominal voltage: Up to 1.0mm² U0/U 300/500 VFrom 1.5mm² U0/U 450/750 V0.6/1kV from 1.5 mm² in the case of fixed and protected installationTest voltage: 4000 VTemperature range: Fixed installation: -55°C to +125°CTemporary (3.000h): up to +145°C Lapp Ölflex heat 125 sc 1x1 gul/grøn r100