Lapp Unitronic bus ibs 3 x 2 x 0.22

LAPP UNITRONIC BUS IBS is a data cable for the field-bus system INTERBUS with a data transmission rate of 500kBit/s at a length of 400m. The field-bus cable is designed to the requirements of the bus-system INTERBUS, the transmission characteristics conform to the system and guarantee a high operating security during data transmission. UNITRONIC BUS IBS is certified by the INTERBUS-CLUB. The cable is intended for limited flexible use and for permanent installation in dry and damp interiors. DesignConductor multi-wire stranded ( 7 x 0.2 mm) of bare copper Insulation PE, 2YI1 in acc. to VDE 0207 part 2 Core identification code colour-coded to DIN 47100 Stranding 2 cores twisted to pair, 3 pairs laid up, one layer polyester foil Screen copper wire braid Outer sheath Sheath PVC, violet, outer diameter approx 7.4 mm Electrical properties at 20°CLoop resistance max. 186 O/km Insulation resistance min. 5 GO x km Mutual capacitance 800 Hz max. 60 nF/km Characteristic impedance 64 kHz O120 +/- 20% 1 MHz O 100 +/- 15% Attenuation 0.256 MHz max dB/100m 1.5 0.772 MHz max dB/100m 2.4 4 MHz max dB/100m 5.2 10 MHz max dB/100m 8.4 16 MHz max dB/100m 11.2 20 MHz max dB/100m 11.9 Near-end cross-talk 0.772 MHz min dB 61 1 MHz min dB 59 2 MHz min dB 55 4 MHz min dB 50 8 MHz min dB 46 10 MHz min dB 44 16 MHz min dB 41 20 MHz min dB 40 Velocity of propagation nom. 0,66c Transfer impedance 30 MHz: max. 250 mO/m Peak operating voltage 250 V (not for power applications) Test voltage conductor/conductor 1500 V conductor/screen 1000 V Mechanical and thermal properties Minimum bending radius fixed installation mm 64 Temperature range static -30° C up to +80° C Flammability flame retardant to VDE 0482, part 265-2-1 / IEC 60332-1 General requirements This cable is conform to the EU-Directive 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances). Lapp Unitronic bus ibs 3 x 2 x 0.22