Lapp ölflex robot 900 p 18g1.0 t500

Lapp ölflex robot 900 p 18g1.0 t500

ÖLFLEX® ROBOT 900 P - Power and control cable for bending and torsional load in harsh environmental conditionsInfoSimultaneous bending and torsionTorsion angle up to +/- 360 °/mUV-resistantTorsion-resistantPower chainOil-resistantMechanical resistanceSupplementary automation components from LappSuitable for outdoor useCold-resistantResistant to contact with many mineral oil-based lubricants, diluted acids, aqueous alkaline solutions and other chemical mediaWide temperature range for applications in harsh climatic environmentsProduct featuresAbrasion and notch-resistantFlame-retardantHigh oil-resistanceFlexible at low temperaturesLow-adhesive surfaceNorm references / ApprovalsDesigned for up to 5 million torsion cyclesFor use in power chains: Please comply with assembly guideline Appendix T3For travel distances up to 10 m.Product Make-upFine or extra-fine strands made of bare copper wireCore insulation: TPECores twisted in layersVersions with additional center pair:2 cores twisted to a pair, PTFE foil wrapping, layer of tinned copper wiresWrapping of PTFE tapePUR outer sheath, black (similar RAL 9005)Technical DataCore identification code: Up to 0.34 mm²: DIN 47100 coresFrom 0.5 mm²: black cores with white numbers, cores ofscreened pair (2 x 1.0) are marked with no. 1 + 2Mutual capacitance: C/C approx. 100 nF/kmC/S approx. 120 nF/kmInductivity: approx. 0.7 mH/kmConductor stranding: Fine wire or extra-fine wireTorsion: Torsion load max. ± 360 °/mMinimum bending radius: For flexible use: 15 x outer diameterFixed installation: 4 x outer diameterNominal voltage: Up to 0,34 mm²: 48 V ACFrom 0.5 mm² U0/U: 300/500 VTest voltage: Up to 0.34 mm²: 1500 VFrom 0.5 mm²: 3000 VTemperature range: Flexing: -40°C to +80°CFixed installation: -50°C to +80°C Lapp ölflex robot 900 p 18g1.0 t500