Lapp Ölflex control tm 4g4 r76

Lapp Ölflex control tm 4g4 r76

ÖLFLEX® CONTROL TMUL MTW TC-ER CIC WTTC AWM 600V OIL RES I+II WET, CSA AWM I/II A/B FT4, Power and control cable 0.6/1 kV, PVC, Tray Exposed Run, MTW.Wide application range (NFPA 70/NEC)/ compliance with NFPA 79 for industrial machineryUnprotected 600V operation on cable tray in the USA, incl. 6 ft. Exposed Run laying sectionsUSA Wind Turbine Tray Cable (WTTC)Flame-retardant according to CSA FT4UL Vertical-Tray Flame TestOil-resistant according to UL OIL RES I & IISuitable for torsional applications which are typical for the loop in wind turbine generators (WTG)Technically resistant to sunlight and ozoneUSA: (UL) TC [E171371], -ER > 2 conductors, (UL) MTW [E155920], (UL) WTTC [E323700], (UL) THHN/THWN (> 1.5 mm²/16AWG) [E172162], UL AWM Style 20886 [E100338]From June 2018:Sunlight Resistant (Sun. Res.), Direct Burial (Dir. Bur.), Submersible Pump Cable (> 1.5 mm²/16 AWG, and < 8 conductors),(UL) PLTC (< 6 mm²/10 AWG) [E216027], (UL) ITC (< 6 mm²/10 AWG) [E196134], (UL) DP-1 [E233406]UL OIL RES I/ II, 75°C WET, 90°C DRY, NEC/NFPA 70, NFPA 79CAN: c(UL) CIC/ TC 600V FT4 [E171371], CSA AWM I/II A/B FT1Fine-wire strand made of bare copper wiresInsulation: PVC with nylon sheath (PA skin)Outer jacket: Specially formulated thermoplastic polymer, Gray.Core identification code: Black with white numbersConductor stranding: Fine-wire, bare copper strandTorsion movement in WTG: TW-0 & TW-2.Minimum bending radius: Static/Occ. moved: 5/15xOD*Nominal voltage: UL/CSA: 600 V (TC, MTW, CIC), WTTC 1000 VUL AWM: 600 VCSA AWM: 1000 VIEC: U0/U = 600/1000 VTest voltage: 2000 VProtective conductor: G = with GN-YE protective conductorX = without protective conductorTemperature range: -40°C (static)/ -25°C (occ. moved) to +90°C (AWM: +105°C) Lapp Ölflex control tm 4g4 r76